• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Door Handle Replacement

Door handles seem like an insignificant thing but if you aren't happy with the style or design of them, or are unable to use them and use, you should consider replacing them. With a bit of patience, you can install the new handle in no time.

Modern door handles are usually equipped with cover plates that conceal the screws to give them an attractive look. If your new handle doesn't have screws already connected, you'll have to attach them separately.

Removing the old Handle

The door handle is not only a decoration for your home It's also an important safety feature that lets you to lock and unlock the door. As time passes the door handle can start to lose its grip or feel a bit loose. It could also begin to look worn out and old. This is a sign that it's time to replace the door handle.

If your door handle is becoming difficult to use, it might be time to replace it. This is an issue because it means that you can no longer lock or unlock your door which could be the risk of security for you and your family.

Another reason to replace your door handle is when it's damaged or broken. A damaged or broken door handle could be extremely dangerous, particularly when your children or elderly family members are unable to open it and end up trapped inside. Luckily, it's quite simple to fix a damaged door handle by replacing the handle that was broken.

Modern door handles are typically standard sizes and will fit any door. If you're not certain that your new door handle will work, take out the old one and measure its housing holes. This will allow you to purchase the right size door handle.

It is the easiest method to take off the old door handle by unscrewing it from the door. Usually it is a matter of using a screwdriver. However certain door handles come with a cover plate that conceals the mounting screws so you'll need to pry off this to reach the screws underneath. After you've removed the old handle, take a note of how the spindle is positioned so that you can align it when you fit the new one.

Alternately, you can take off the door handle by removing it from the latch mechanism. You can make use of a screwdriver to take off the door handle. However, you will need to locate the small latch that is located on the edge trim piece. After you have removed the latch, take the handle off the strike plate and then the latch off the door's edge.

The Strike Plate

When you replace your handle, you'll also be required to replace the latch plate, which holds the hole that the door's latch is inserted into when it closes. The package the new handles come in will have two different latch plates - a rectangular one and circular (see the diagram above detailing the parts of the door handle). If your current latch plate has rectangular, swap it out for the circular one so that the latch hooks onto the strike plate in a manner that makes the handle easier to operate.

The first step is to loosen the screw that's holding the latch plate that was previously in place. The screws are typically tight and require a fair amount of force to loosen them. It may be helpful to get a second person to assist in this area if it is possible.

The latch plate should be removed from the door after the screws have been removed. If it's stuck or won't move, use a small nail file to scrape around the edges of the latch plate. This may help free the plate.

Now, you can proceed to preparing the new door strike plate to be installed. Attach the latch plate to the doorjamb using the wood screws that came with your new upvc windows handles. Do not tighten the screws too much as this could damage the strike plate.

If you're unsure if the latch plate is in the right position, try closing and opening the door to see whether it locks and closes correctly. If not then you'll have to adjust the strike plate upwards or down, or even forward or back, until the door closes and latches properly.

If the door is still jiggling or moving, you may need to increase the size of the hole for the latch in the strike plate. This is more frequent in older doors, however it could be due to wear and tear hinge mortises that are not deep enough or not the right size for the latch, or from a broken or damaged strike plate that is damaged or broken. If this is the situation you can use a metal file instead of a chisel or hammer to adjust the strike plate.

Eliminating the Latch

The latch is a curved metal piece that slides into and out of a hole on the inside of your door. The latch moves forward when you turn the handle for patio door. It also hooks in an opening in the door frame so that the door is closed. If your door shakes when you close it, changing the latch may be the only thing needed to correct the issue.

It's difficult to see the screws that secure the latch to the door, however there's usually a tiny slot on the trim plate that permits you to insert a screwdriver in order to remove it. After removing the trim plate, you will be able to pull off the latch, as well as the bolts that hold it in place and the spindle.

If the latch isn't able to be released, try using the clip of a paper or tool to free it from the handle mechanism. Place the item in the slot for the latch that is recessed. gently turn or jiggle it until you feel the latch and handle begin to split. You may need to repeat this several times before the latch comes loose enough to pull out.

You should be able slide the new latch into its slot without any issues once you have removed the old one. Make use of the new screws to attach the latch to the strike plate or door frame. Make sure it's correctly placed in the slot, aligned with the screw chambers.

Take note of the backset (the distance between the center of the large hole in the Conservatory door handles's front and the edge) before installing the new handle. Verify that the size of the latch of the new handle is equal to the measurement.

If you're replacing the handle or latch or handle, or if your previous lock cylinder has been damaged, then you'll need a new one. If you're not changing locks the new lock will fit inside the recess you have already installed, and will work with your current keys. Select a latch with rectangular cover plates that match your old upvc window locking handles.

Then remove the Cover Plate

You can replace your old door handles with a new rose and lever designs to improve the look of your house. You can purchase complete sets that include the appropriate escutcheons and privacy adjustor kits.

To replace an internal door handle remove the cover plate (or rose), which covers the screws and mechanism. Utilize a flathead to take off the cover plate. It could have a slot along one edge or be held in place by pins.

Once the cover plate is removed, remove the screw that holds the inside handle in place and set it aside. It is also necessary to take out the screws that hold the latch and inner plates, which you can do by loosening them with a Philips screwdriver. Then, remove the inner plates and latch plate from the door and set them aside.

Not all doors have this gap. If yours doesn't then you'll have to drill a hole into the door to accommodate the new handle. This is the same procedure for opening a locked door however, you'll have to be extra careful not to scratch the upvc door handles or frame.

The installation of new door knob screws is required after the holes have been made. Choose the same dimensions as your old screws to ensure that you don't get a handle that is too loose or tight. You'll also need to install a new strike rod and latch plate, which aren't included with most door handle sets.

Amazon's Choice FAERSI 2-piece chrome finish handle sets are an excellent option if you're in need of a top-quality interior door handle replacement set. It's a factory-fit and has received hundreds of five-star reviews from delighted customers. It's a great option to replace damaged or worn door handle hardware in the interior of your Chevy HHR.